Controls

 

Snow & Gutter Ice Melt Controls
Temp Control & Monitoring
Other Products

Electronic Thermostat

 

GPT 130 Single-Point General Purpose Heat-Trace Control

GPT 130 Single-Point General Purpose Heat-Trace Control

 

MANUFACTURER: Environmental Technology, Inc.

 

Approvals: UL, CSA

 

Applications: Freeze Protection and other Temperature Monitoring and Control Applications for Pipe Tracing

 

The GPT 130 Heat–Trace Control is a single–point microprocessor–based heat–trace control thermostat. It is ideal for applications which require Ground–Fault Equipment Protection (GFEP). Ideal uses include freeze protection, hot water temperature maintenance, grease line trace, tank heating, and other temperature monitoring and control applications.

 

  • Adjustable temperature setpoint allows precise control of a wide range of processes
  • Can use an NEC Class 2 temperature sensor with up to 2,000 ft. cable for enhanced installation options
  • Thermistor temperature sensor with 20 ft. cable included for applications of −40 °F to 230 °F (−40 °C to 110 °C)
  • RTD input allows higher accuracy and extreme–temperature applications
  • The unit can accommodate RTD sensors with 2–, 3–, or 4–wire configuration
  • Temperature display for accurate adjusting and monitoring
  • Load current display for accurate adjusting and monitoring
  • Ground fault current display for accurate monitoring, protection, and alarm
  • Adjustable alarm thresholds for excess ground fault current, load current, and temperature
  • Alarms indicated with panel display and relay contact for remote signaling
  • A Fault Mode setting which can be set to energize or de-energize the heaters during a sensor failure
  • Fire Protection Mode maintains heater operation for use in critical fire protection systems
  • Durable weather–resistant NEMA 4X IP66 enclosure permits indoor or outdoor installation

 

Data Sheet PDF View Data Sheet Manual PDF View Manual Installation Sheet View Installation Sheet

 

 

GPT 230 Dual-Point General Purpose Heat-Trace Control

GPT 230 Dual-Point General Purpose Heat-Trace Control

 

MANUFACTURER: Environmental Technology, Inc.

 

Approvals: UL, CSA

 

Applications: Freeze Protection and other Temperature Monitoring and Control Applications for Pipe Tracing

 

The GPT 230 Dual Channel Heat–Trace Control is a dual–point microprocessor–based heat–trace control thermostat. It is ideal for applications which require two independent heater–control Channels with Ground–Fault Equipment Protection (GFEP). Ideal uses include freeze protection, hot water temperature maintenance, grease line trace, tank heating, and other temperature monitoring and control applications.

 

  • Dual channel heat trace capabilities allows for complete control and monitoring of two separate channels from one unit
  • Adjustable temperature setpoint allows precise control of a wide range of processes
  • Can use an NEC Class 2 temperature sensors with up to 2,000 ft. cable for enhanced installation options
  • Two Thermistor temperature sensors with 20 ft. cables included for applications of −40 °F to 230 °F (−40 °C to 110 °C)
  • RTD input allows higher accuracy and extreme–temperature applications
  • The unit can accommodate RTD sensors with 2–, 3–, or 4–wire configuration
  • Temperature display for accurate adjusting and monitoring
  • Load current display for accurate adjusting and monitoring
  • Ground fault current display for accurate monitoring, protection, and alarm
  • Adjustable alarm thresholds for excess ground fault current, load current, and temperature
  • Alarms indicated with panel display and relay contact for remote signaling
  • A Fault Mode setting which can be set to energize or de-energize the heaters during a sensor failure
  • Fire Protection Mode maintains heater operation for use in critical fire protection systems
  • Durable weather–resistant NEMA 4X IP66 enclosure permits indoor or outdoor installation

 

Data Sheet PDF View Data Sheet Manual PDF View Manual Installation Sheet View Installation Sheet

 

 

FPT 130 Single-Point Freeze Protection Heat-Trace Control

FPT 130 Single-Point Freeze Protection Heat-Trace Control

 

MANUFACTURER: Environmental Technology, Inc.

 

Approvals: UL, CSA

 

Applications: Freeze Protection for Pipe Tracing

 

The FPT 130 Heat-Trace Control is a single-point microprocessor based heat-trace control thermostat. It is ideal for applications which require Ground-Fault Equipment Protection (GFEP). Ideal uses include freeze protection, and other temperature monitoring and control applications.

 

  • Adjustable temperature set point of 30 °F, 38 °F, 45 °F, or 50 °F (−1.1 °C, 3.3 °C, 7.2 °C, or 10 °C) for various freeze protection applications
  • Can use an NEC Class 2 temperature sensor with up to 2,000 ft. cable for enhanced installation options
  • Thermistor temperature sensor with 20 ft. cable included for applications of −40 °F to 230 °F (−40 °C to 110 °C)
  • Ground–Fault Equipment Protection with manual and automatic test function
  • Alarms for excess ground fault current, low load current, and temperature
  • Alarms indicated with panel LED lights and relay contact for remote signaling
  • A Fault Mode setting which can be set to energize or de-energize the heaters during a sensor fault
  • Fire Protection Mode maintains heater operation for use in critical fire protection systems
  • Durable weather–resistant NEMA 4X IP66 enclosure permits indoor or outdoor installation

 

Data Sheet PDF View Data Sheet Manual PDF View Manual Installation Manual View Installation Manual

 

 

CM-2201 Single Point Circuit Management System

CM-2201 Single Point Circuit Management System

 

MANUFACTURER: Nelson Heat Trace

 

Approvals: CSA

 

Applications: Freeze Protection and other Temperature Monitoring and Control Applications for Pipe Tracing

 

Nelson's Single Point Circuit Management System is a microprocessor based digital control and monitoring system that has been specifically designed for stand-alone or networked electric heat tracing applications. This system provides temperature control and heater cable monitoring while communicating additional information to operations personnel such as temperature alarms, voltage and current alarms, ground fault leakage, sensor failures and communications failures.

 

  • Easy to use interface
  • On/Off or proportional control
  • Ground fault alarm and trip settings
  • Dual RTD input
  • Programmable auto test cycle
  • Host communications (RS-485 ModBUS RTU)
  • NEMA 4X durable molded fiberglass polyester enclosure
  • Temperature range of -58 to 932°F

 

Data Sheet PDF View Data Sheet Manual PDF View Manual Installation Manual View Installation Manual

 

 

CM-2202 Dual Point Circuit Management System

CM-2202 Dual Point Circuit Management System

 

MANUFACTURER: Nelson Heat Trace

 

Approvals: CSA

 

Applications: Freeze Protection and other Temperature Monitoring and Control Applications for Pipe Tracing

 

Nelson's Dual Point Circuit Management System is a microprocessor based digital control and monitoring system that has been specifically designed for stand-alone or networked electric heat tracing applications. This system provides temperature control and heater cable monitoring while communicating additional information to operations personnel such as temperature alarms, voltage and current alarms, ground fault leakage, sensor failures and communications failures.

 

  • Easy to use interface
  • On/Off or proportional control
  • Ground fault alarm and trip settings
  • Dual RTD input
  • Programmable auto test cycle
  • Host communications (RS-485 ModBUS RTU)
  • NEMA 4X durable molded fiberglass polyester enclosure
  • Temperature range of -58 to 932°F

 

Data Sheet PDF View Data Sheet Manual PDF View Manual Installation Manual View Installation Manual

 

 

TraceMate PIPE SENSING ELECTRONIC THERMOSTAT

TraceMate PIPE SENSING ELECTRONIC THERMOSTAT

 

MANUFACTURER: Nextron Corporation

 

Approvals: FM, CSA US

 

Applications: Control and Monitoring for Self-Regulating or Mineral Insulated Heaters

 

Simple single point electronic thermostat with built in ground fault protection and auto-test feature. Approved or ordinary and Class I Division 2 locations. Straightforward covermounted green "OK" light indicates controller has power and all heater functions are normal.

 

  • NEMA 4X powder coated steel enclosure
  • 120, 208/240, and 277 volt models
  • High and Low Temperature Alarms
  • Low Current Alarm
  • Sensor Failure Alarm
  • Remote Alarm Contacts

 

Data Sheet PDF View Data Sheet Manual PDF View Manual

 

 

TMII-CTR PIPE SENSING ELECTRONIC THERMOSTAT

TMII-CTR PIPE SENSING ELECTRONIC THERMOSTAT

 

MANUFACTURER: Nextron Corporation

 

Approvals: FM, CSA US

 

Applications: Control and Monitoring for Self-Regulating or Mineral Insulated Heaters

 

Simple two point electronic thermostat with built in ground fault protection and auto-test feature. Approved or ordinary and Class I Division 2 locations. Covermounted LCD continuously scrolls vital heater setpoints and measured readings. Includes remote alarm dry contact.

 

  • NEMA 4X powder coated steel enclosure
  • 120, 208/240, and 277 volt models
  • High and Low Temperature Alarms
  • Low Current Alarm
  • Sensor Failure Alarm
  • Remote Alarm Contacts

 

Data Sheet PDF View Data Sheet Manual PDF View Manual